Vacuum bottle filler for oil, Enolmaster, 2 filling heads

Professional vacuum filling system that fills bottles under vacuum directly from the storage container, thereby reducing oxidation of the liquid during bottling. Can be used for oil-based products. It starts automatically when the bottle is pressed against the filling unit and stops when the bottle is filled to the desired level, as the device has an adjustable filling setting. Both the filling volume and the height of the bottle can be adjusted. Perfect for the smaller vineyard, farm shop and the like. Any surplus liquid from the filling, caused by foam or air bubbles, is automatically directed into the container at the back of the device. This can subsequently be bottled. Therefore nothing goes to waste during bottling. The container you fill from should preferably stand at the same level as the machine, as placing it too low will result in the vacuum function having to work harder to fill the bottles, and they may not be filled all the way to the set level. Up to approximately 250 bottles (0.75 l) per hour can be filled with this machine. See the product's filling concept at this YouTube address: Illustration Very easy to take apart and clean with hot water. Made by a company in Italy that has specialised in the development and production of bottling equipment for more than 20 years. Suitable for bottles with an inner neck diameter of 16-28 mm and a height of 25 to 33 cm. If the bottles are lower than 25 cm, you can make a base of wood or similar for the bottles to stand on. The height between 25 and 33 cm is easily adjusted by setting the filling arm. Max. temperature tolerance: 40 °C. A 200 cm suction hose is included. Extra hose can be purchased. See item no. 4304b, which has a max. temperature tolerance up to 60 °C, and item no. 4304c for temperatures between 60 and 90 °C. Can be connected to a filter system, see item no. 3249, so that you can both filter and bottle in one operation. See also the selection of filters in both plastic and stainless steel in this product group. Motor: 220 v – 50/60 Hz Dimensions: 65 x 46 x 45 cm Works with a pressure of -0.8 bar. Note: The device cannot be used for filling soft PET plastic bottles and the like. For bottling in such bottles, see item nos. 3589 and 3590. However, the device can be used for hard HDPE plastic bottles. Feel free to ask us for more details about this.0. Net weight: 30 kg